Preac's Micro - Precision Sander was developed by the makers of the well known Preac Table Saw, in response to many requests from customers for a similar quality small scale thickness sanding capability. It has been developed for model makers and hobbyists who have a requirement for wood of different thicknesses which are not available from commercial sources. It will allow the scratch or model builder to manufacture his own lumber supply from resawn boards or from wood bandsawed from small logs and other sources.

• Will sand wood from .010" to .750" thick and up to 3 inches in width.
• Sanding sleeves are available in a variety of grits
• The table is adjustable from side to side to provide boards of uniform thickness or ones with an intentional wedged/tapered cross section.
• Cutting speed of the drum is approximately 14,000 surface inches per minute or 1,500 RPM.
• A hole is provided in the guard to attach a standard 1.25" shop vacuum hose.

  SPECIFICATIONS:

  • Size: 6 1/2" high and mounted on a 10" x 12" wood base with the motor.
  • Motor: powered by a thermally protected 1/8 HP capacitor motor.

  Price........$365.00 (completely assembled including three assorted sanding sleeves.)
  Shipping:...$15.75 East of the Mississippi River, $18.75 West of the Mississippi River and $45 to Canada. Allow 3 - 4 weeks for delivery.

  The link below is a full 3 dimensional line drawing of the Thickness Sander components. It is large and scanned for highest resolution possible, so may take a couple of minutes to load.
  Line Drawing
  Return to Preac Index

  © Copyright 1997 Nature Coast Inc. arf@naturecoast.com