This is the Midwest MEPS-III Motorizing System. This system allows the modeler to power the Boothbay Lobster Boat #964, Cranberry Isle #984 and the Seguin #984 for radio control use.FEATURES:
Speed control with two speeds forward, two speeds reverse and fuse.
12V high torque motor.
Pre-wired and pre-soldered connections.
Double sided tape for attaching speed control to servo.
One Midwest MEPS III Motorizing system with: Motor
Two 5W resistors, 2A fuse w/ holder wiper arm, wiring with (Kyosho-type) connectors and double sided tape.
Installing in boat (refer to the boat's construction manual for installing of the motor and radio equipment).
Two six cell flat battery packs with standard connector, (DTXC2100) CA glue to connect wiper to servo horn (GPMR6001)
Motor: 12 - 14.4V, 5 pole RPM: 6500 @ 14.4V Typical Current Draw: 1.3A Fuse: 2A JXS 6/8/01 ir/jl