Perfect cuts in steel, non-ferrous metals, wood and plastic. Even cuts glass and ceramics with diamond blade. Solid, ribbed die-cast aluminum housing (not a tubular or sheet metal construction. Double ball bearing aluminum pulleys, sturdy machined table with slot for miter gauge as well a coolant. trough. Table tilts up to 45 degrees for accurate miter sawing. Low noise 110-120V motor (high quality, for quiet, prolonged use) with toothed belt. Electronically controlled speed for exceptionally accurate cutting (no subsequent finishing necessary). A table indicates the recommended speed for practically all materials. The blade size .2" x .02" (5 x 0.4mm), is ideal for fine work, allowing cutting of small radii. NOTE: Cooling system including tray, container, etc. is not included, but is necessary for cutting glass and ceramics using Diamond Blade. Please see below. Technical Data Speeds-------------------------395 to 820 ft/min (with feedback effect). Throat Depth------------------5.9" Max Workpiece Height------3.15" \Table Size---------------------7.9" x 7.9" ((adjustable from 0 to 45 degrees). Includes------------------------One 42" x .2" x .02" band saw blade (14 TPI) Weight-------------------------11.5 lb. #PR37170 Price.....$299.99 See Below for additional blades and accessories. BLADE GUIDES Triple ball bearing system with feed pipe for coolant when used with the diamond blade. Can also be used in conjunction with normal blades. #PR28187 Price.....$20.95 BLADES Swedish Steel 42" x .2" x .02" (1,p65 x 5 x 0.4mm). Fine toothed (24 steel and brass. #PR28174 Price.....$14.95 Swedish Steel Coarse toothed (14 TPI). For wood and plastics. #PR28176 Price.....$14.95 Special Tempered Swedish Steel With induction-hardened teeth. Extra narrow for tight curves 42" x .14" x .02" (1,065 x 3.5 x 0.5mm). Coarse toothed 14 TPI). For aluminum and plastic. #PR28180 Price.....$19.95 Diamond Blade For ceramics, glass and fiberglass. 42" x .12" x 0.2" (1,065 x 3 x 0.3mm). Must be used in conjunction with coolant #PR28186 Price.....$127.95 COOLANT SYSTEM Coolant Container Plastic container with stop cock, 39" (100cm) tubing, 2 nipples for the MBS 115/E table and mounting bracket/screws. Holds 1 quart. #PR28188 Price.....$38.95 Coolant Collection Tray Size 16.5" x 12.2" x .6" (420 x 310 x 15mm). Includes gasket for sealing the attachment holes of the machine. With 19.7" (50cm) discharge tube and nipple for band saw table. The tray is undrilled and may be used on other machines too. #PR28189 Price.....$27.95 Proxxon Index