Or Call
| #1021 #1022 #1023 #1024 #1026 #1030 #1034 #1035 #1036 #1037 #1037H #1038 #1040 #1041A #1041B #1041C #1041D #1041E #1041F #1041G #1042 #1043 #1050 #1051 #1052 #1060 #1090 #1091 #1092 #1093 #1095 #1096 #1097A #1097B #1097C #1097D #1097E #1097F #1110 #1111 #1120 #1122 #1130 #1132 #1140 #1150 #1151 #1152 #1159 #1160 #1161 #1162 #1170 #1171 #1173 #1190 #1200 #1210 #1220 #1221 #1224 $1225 #1230A #1230B #1230C #1230D #1230E #1250 #1251 |
$98.50ea. $5.00 ea. $7.50 ea. $7.50 ea. $4.00 ea. $63.50 ea. $9.25 $14.30 ea. $5.60 set $7.80 ea. $10.15 $26.75 29.85 set $4.15 ea. $4.15 ea. $4.15 ea. $4.15 ea. $4.15 ea. $4.15 ea. $4.15 ea. $5.40ea. $2.90 set $63.10 ea. $7.90 set $7.75 set $71.40 $36.25 ea. $9.90 ea. $10.20 ea. $19.20 ea. $27.60 set $1.95 ea. $5.05 ea. $5.05 $5.05 ea. $5.05 ea. $5.05 ea. $5.05 ea. $5.60 ea. $12.00 ea. $6.20 ea. $7.00 set $3.90 ea. $2.60 ea. $10.90 ea. $38.20 ea. $15.80 ea. $15.90 ea. $7.90 ea. $7.90 ea. $24.45 set $24.45 set $4.60 ea. $4.95 ea. $27.90 $24.80 ea. $44.60 ea. $19.85 ea $61.70 ea. $14.45 ea. $19.50 $26.50 ea. $11.50 ea. $11.50 ea. $11.50ea. $11.50 ea. $11.50 ea. $24.55 set $19.75 ea |
Motor 115V 60 HZ 1750 RPM 1/4 HP 1/2" shaft, split phase, switchand cord included Motor mount bracket with necessary hardware, fits above motor and nema 48 frame motors Mounting board 12" x 18" used for #1021 motor (motor mount bracket not included) Mounting board 8" x 24" used for #1021A motor (motor mount bracket not included) Depth stop for work piece in chuck 4 jaw 3 1/4" dia. lathe chuck 3/4-16 thd. mount, jaws adjusted independently (reversible heat treated steel jaws) Lathe Dog, hold work piece while turning b etween centers.Face plate 3 1/4" 3/4-16 thd. mount Face plate 3 1/4" dia. 3/4-16 thd mount Face plate angle bracket set Face plate 2" dia. (wood turners) Face Plate 2"dia. with 3 holes drilled(wood turn) Tool Rest 4" swivel joint height adjustable (wood turn) Collet set, collet closer with 8 collets sizes 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, & one blank 1/8 collet 5/32 collet 3/16 collet 7/32 collet 1/4 collet 9/32 collet 5/16 collet Collet closer 4 blank collets furnished unslotted for making special arbors (may be bored and slotted) 3 jaw 3 1/4" dia. self-centering scroll chuck (steel body) with reversible aluminum soft jaws 3/4-16 thd. Additional blank soft jaw set Full circle soft jaw for 3 jaw chuck 4 jaw chuck, 3-1/4"diam. 3/4-16 thread, self centering scroll (steel)revers. aluminum soft jaws 0-1/4" Jacobs drill chuck, industrial quality 3/8-24 thd. 0-1/4" Jacobs drill chuck commercial quality 3/8-24 thd. 1/16-3/8" Jacobs drill chuck, commercial quality 3/8-24 thd. 1/8-1/2" Jacobs drill chuck, commercial quality 3/8-24 thd. 6 pc tool bit set, high speed steel, left & right, round nose, boring bar, cut off & 45degree chamfer Unground tool bits 1/4" square Left hand tool bit Right hand tool bit 45 degree chamfer tool bit Round nose tool bit Boring bar tool bit Cut off tool bit Slitting saw arbor, screws directly on spindle including wrench .032 x 2 1/2" dia. high speed slitting saw Grinding wheel arbor, screws directly on spindle Grinding wheel set Blank arbor 1.00" dia. screws directly on spindle (may be machined for special jobs) Blank arbor Drill chuck arbor, attaches Jacobs chucks to spindle 3/8-24 thd. Drilling tail stock, lever operated 5/8" off set with dead center, 3/8-24 thd. for drill chucks Needle bearing center, spring loaded Die holder for tailstock (will accept 13/16" and 1.00" button dies Spare Gates polyurethane vee belt (est. belt life 5000 hours) No. 3M 315 12 1/2" flat length Spare Gates Polyurethane vee belt (est belt life 5000 hours) No. 3M 500 20" flat length 6 step pulley set (2 pulleys per set) 3/8" motor shaft 3M 500 belt included Pulley set as above for 1/2" shaft motor STD 3M 315 belt included (3M 500 belt optional) Extra tool post (same as supplied with lathe) Back tool post, tool bit mounts upside down, 2 tools may be used at same time T-Bar Cut off tool , height adjustable AVAILABLE AFTER 9/1/00 Steady rest 3/32" to 1 1/2" capacity Top slide (compound) mounts on crosslide for cutting tapers and angles with tool post Radius Turning Attachment Milling attachment mounts directly on cross slide (2 x 3 3/4" table) 3/4-16 Chuck adaptor, adapts chuck to mill table Fly Cutter 1-1/4" to 2-1/2" diam. 3/4-16 thread mount, tool bit included Milling vise, 1.25" opening x 2" wide 1/16 dia. milling cutter, 2 flute double end 3/16 shank, mount directly in 3/16 collet 3/32 dia. milling cutter, 2 flute double end 3/16 shank, mount directly in 3.16 collet 1/8 dia. milling cutter, 2 flute double end 3/16 shank, mount directly in 3/16 collet 5/32 dia. milling cutter, 2 flute double end 3/16 shank, mount directly in 3/16 collet 3/16 dia. milling cutter, 2 flute double end 3/16 shank, mount directly in 3/16 collet Riser block kit for headstock and tool post (provide 6.00 swing...(riser for tailstock not included) Tailstock riser only |
